Operation procedures/pictures
Disassemble the motor and motor support
Use screwdriver to screw off the screws which fix the
motor and motor support, can take off the motor and
motor support.
(As shown in Fig.8-19)
Disassemble the 4-way valve
(Only for condenser)
To unsolder 4 pcs solder joint of the 4-way valve,
then use spanner to screw off 1pc nut of the loop
from the 4-way valve, can disassemble the 4-way
valve. (As shown in Fig. 8-20)
Motor
Motor support
Fig.
Solder joint
Nut
Fig.