HEAT mode operation
If indoor temp. is lower than setting temp., compressor will run in HEAT mode.
If indoor temp. is higher than setting temp., compressor and outdoor fan will stop, only indoor
fan will run, guide louver will swing horizontally, one minute later, indoor fan will stop running.
The setting range is 16¡æ¡«30¡æ.
Press the SWING button,
swing louver will automatically
swing and when repressed the
button, it will stop to swing.
Press FAN button, set fan speed.
Press the buttons to adjust
the desired temperature.
After powered on, press 1/0
button, unit will start to run.
Press MODE buton
to select the HEAT mode.