Gree KF-20GW/A20 Service Manual page 70

Operation procedures/pictures
Disassemble the motor and motor support
Use screwdriver to screw off the screws which fix
the motor, and pull out the connection wire of the
motor and elelctric box, can disassemble the motor.
And use screwdriver to screw off the screw under
the motor support, can disassemble the motor sup-
port.(As shown in Fig.8-30)
Disassemble the 4-way valve
(Only for cooling and heating type unit)
To unsolder 4pcs solder joint of the 4-way valve,
then to screw off the loop nut from 4-way valve,
can disassemble the 4-way valve.(As shown in
Fig.8-31)
Motor
Motor support
Solder point
Loop nut
Fig.
Fig.