Function and Control
HEAT mode operation procedure
If room temp. is lower than set temp., compressor runs at HE AT mode.
If room temp. is higher than set temp., compressor and outdoor fan motor stop, only indoor fan
motor runs.
Set T EMP. should be in range of 16
12
to 30
3.Press SWING button, the
louvers start to rotate
automatically, and stop
when repress it.
4.Press FAN button, set
fan speed.
5.Press T E MP. button,
set suitable TEMP.
1.Plug in, press ON/OFF
button, then air conditioner
is turned on.
2.Press MODE button,
set
operation mode.