Table of Contents
Advertisement
Before starting to build, use the Kit Contents list to take an inventory of this kit to make sure it is complete, and inspect the
parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need
assistance with assembly, contact Great Planes Product Support. When reporting defective or missing parts, use the part
names exactly as they are written in the Kit Contents list on this page.
21
19
1.
Fuselage & Canopy
2.
Stab Center Section
3.
Right Stab Half and Elevator
4.
Left Stab Half and Elevator
5.
Aluminum Stab Mounting Tubes
6.
Left Wing and Aileron
7.
(4) Ply Wheel Pant Mounts
8.
(4) Ply Wing Washers
9.
(5) Hardwood Cowl Blocks
(8) 4-40 x 12" Threaded One End Pushrods
(4) 4-40 x 3/4" Bolts
(2) Nylon Tail Wire Straps
(8) 4-40 Threaded Metal Clevises
(7) 4-40 Solder Metal Clevises
(8) 8-32 x 1" Socket Head Cap Screw
(15) Silicone Retainers
(9) 8-32 Blind Nuts
(33) #4 x 5/8" Screws
(13) #8 Flat Washers
(5) 8-32 x 1" Phillips Screw
(2) 1/8" Wheel Collar
KIT CONTENTS
Great Planes Product Support:
Telephone: (217) 398-8970
Fax: (217) 398-7721
E-mail: airsupport@greatplanes.com
23
24
22
20
1
18
17
16
Kit Contents (Photographed)
10. (8) 4-40 x 12" Metal Pushrods
11. (2) Aileron Servo Covers
12. (2) Hardware Bags (contents listed
below)
13. Hardwood Stick
14. Fuel Tank
15. CA Hinge Material
16. Engine Mount
17. 4" Aluminum Spinner
Kit Contents (Not Photographed)
(4) 1/4 -20 x 2" Nylon Bolt
(1) 6-32 Torque Rod Horn
(1) Large Quick Connector
(1) Retainer For Quick Connector
(7) #4 Flat Washers
(3) 4-40 x 1/4" Socket Head Cap Screw
(2) 2" x 3/16" Axles
(2) Large Axles Nuts
(2) 3/16" Wheel Collars
(2) 6-32 x 1/8" Socket Head Set Screws
(4) #4 x 3/8" Screws
(4) 1/4-20 Blind Nuts (installed in wing)
13
25
11
15
14
10
12
7
2
3
4
5
6
9
7
8
18. Tail Wheel Assembly
19. (2) Fiberglass Wheel Pants
20. (2) 4" Wheels
21. Landing Gear
22. Right Wing and Aileron
23. Fiberglass Cowl
24. Rudder
25. Aluminum Wing Tube
(8) #8 Lock Washer
(4) #2 x 3/8" Screw
(4) #2 Washers
(8) 4-40 Hex Nuts
(2) #4 x 3/4" Screw
(4) Nylon Dowels
(6) Giant-Scale Control Horns
(1) #64 Rubber Band
(2) 3mm x 250mm Hardwood Dowel
(1) Landing Gear Cover
Advertisement
Table of Contents
