Safety Precautions; Decisions You Must Make Before Beginning To Build - GREAT PLANES Extra 300S ARF Instruction Manual

Great planes extra 300s arf 1/4 scale almost-ready-to-fly radio control airplane
Hide thumbs Also See for Extra 300S ARF:
Table of Contents

Advertisement

If you would like photos of the full-size Patty Wagstaff Extra
300S for scale documentation, or if you would like to study
the photos to add more scale details, photo packs are
available from:
Bob's Aircraft Documentation
3114 Yukon Ave
Costa Mesa, CA 92626
Telephone: (714) 979-8058
Fax: (714) 979-7279
e-mail: www.bobsairdoc.com
PROTECT YOUR MODEL, YOURSELF
& OTHERS...FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1. Your Extra 300S ARF should not be considered a toy, but
rather a sophisticated, working model that functions very
much like a full-size airplane. Because of its performance
capabilities, the Extra 300S ARF, if not assembled and
operated correctly, could possibly cause injury to you or
spectators and damage to property.
2. You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model. In a few cases
the instructions may differ slightly from the photos. In those
instances the written instructions should be considered as
correct.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in first-class
condition, and a correctly sized engine and components
(fuel tank, wheels, etc.) throughout the building process.
5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.
6. You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not already an experienced R/C pilot, you
should fly the model only with the help of a competent,
experienced R/C pilot.
8. While this kit has been flight tested to exceed normal use,
if the plane will be used for extremely high stress flying,
such as extreme 3D flying, the modeler is responsible for
taking steps to reinforce the high stress points.
WARNING: The cowl and wheel pants included in this kit
are made of fiberglass, the fibers of which may cause eye,
skin and respiratory tract irritation. Never blow into a part
(wheel pant, cowl) to remove fiberglass dust, as the dust
may blow back into your eyes. Always wear safety goggles,
a particle mask and rubber gloves when grinding, drilling
and sanding fiberglass parts. Vacuum the parts and the
work area thoroughly after working with fiberglass parts.
We, as the kit manufacturer, provide you with a top quality
thoroughly tested kit and instructions, but ultimately the
quality and flyability of your finished model depends on
how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to
the performance or safety of your completed model.
Remember: Take your time and follow the instructions
to end up with a well-built model that is straight and true.
If you have not flown this type of model before, we
recommend that you get the assistance of an experienced
pilot in your R/C club for your first flights. If you're not a
member of a club, your local hobby shop has information
about clubs in your area whose membership includes
experienced pilots.
In addition to joining an R/C club, we strongly recommend
you join the AMA (Academy of Model Aeronautics). AMA
membership is required to fly at AMA sanctioned clubs.
There are over 2,500 AMA chartered clubs across the
country. Among other benefits, the AMA provides insurance
to its members who fly at sanctioned sites and events.
Additionally, training programs and instructors are available
at AMA club sites to help you get started the right way. Contact
the AMA at the address or toll-free phone number below:
DECISIONS YOU MUST MAKE
BEFORE BEGINNING TO BUILD
This is a partial list of items required to finish the Extra 300S
ARF that may require planning or decision making before
starting to build. Stock numbers are provided in parentheses.
3
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
Tele: (800) 435-9262
Fax (765) 741-0057
Or via the Internet at:
http://www.modelaircraft.org

Advertisement

Table of Contents
loading

Table of Contents