Operation; Operation External Connections And Controls - RTS BP-319 Operating Instructions Manual

Operation External Connections and Controls

NOTE: The numbers refer to the callouts in Figure 1.
Volume Control: Use this control to adjust the headset/earset listen level.
1.
Chan Select Button (BP-351 Only): The Chan button allows the user to
2.
select which intercom channel is active. The yellow indicator next to 1 or 2
lights to show the active channel. Press the Chan button to change the
channel selection.
Call Button and Indicator: The Call function allows the user to send or
3.
receive signals to/from other devices on the intercom channel selected. The
Call button operation in two ways:
Call/Receive: When there is an incoming call signal, the indicator is
red. (If Audible Call Alert is enabled, incoming call will cause beeps in
the headset.)
Call Send: To send a call signal to all stations on a selected channel,
press and hold the Call button until a verbal response is received. The
indicator will glow red.
Talk Button and Indicator: The talk button activates the headset microphone
4.
and operates in two ways:
Latched Mode: Tap the button once to talk. The indicator will glow
green. Tap the button again when finished with a conversation.
Momentary Mode: Press and hold the button to talk momentarily.
Release the button when finished talking.
Sidetone Control: When using a headset, this control adjusts your own voice
5.
level heard in the earphones. To adjust the level, tap the Talk button once to
turn ON the headset microphone. Then, use a small Phillips-head
screwdriver to increase or decrease your voice level while talking into the
microphone. (This control is accessible by removing one screw of the belt
clip.)
CHAPTER 2

Operation

Operation 5