Keypanel Setup; Intercom Key Operation; Volume Adjustment; Momentary Vs. Latching Operation - RTS WKP-1 Manual

Digital matrix intercom system industrial keypanel

Hide thumbs Also See for WKP-1:

Table of Contents

You can only make keypanel assignments using AZedit.

REFERENCE: For more information on AZedit, see the AZedit user manual.

Adjust speaker volume with the volume control.

For momentary key activation, do the following:

Press and hold the intercom key.

For latching operation, do the following:

Tap the intercom key to turn it on.

Tap the intercom key again to turn it off.

NOTE: If the LED next to a key does not turn on when the key is activated, this means the key is not currently

assigned. The electronic latching feature (dip switch 1) must be enabled in order to use latching. See "Dip

Switches" on page 12.

CHAPTER 3

Keypanel Setup

Table of Contents