DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
IPoA or Static IP Connection
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), IP,
Miscellaneous, and VLAN.
Figure 34. Configuring Static IP WAN connection.
Page 48 of 182
Configuring via Web-based Interface