DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
EtherWAN
On the Advanced / EtherWAN page, you can configure the router to connect to a private Ethernet
line.
The Ethernet WAN function allows using any Ethernet port of the router to access the
!
Internet via Ethernet technology. When the function is enabled, the router is still able to
access the Internet via ADSL technology.
To use one of the router's LAN port as the WAN port, click the icon corresponding to this port and
click the Enter button. Port configured as the WAN port is highlighted in green.
If in the future you need to disconnect the LAN port from the private Ethernet line, click the icon
highlighted in green and click the Enter button.
Figure 92. The Advanced / EtherWAN page.
Page 127 of 182
Configuring via Web-based Interface