D-Link DSL-2750U User Manual page 110

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
When the Open or Shared value is selected, the WEP Encryption settings section is displayed
(the section is unavailable for the wireless network operating modes which support the standard
802.11n):
Figure 82. The Open value is selected from the Network Authentication drop-down list.
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP
as HEX
WEP key length
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Page 110 of 182
Configuring via Web-based Interface
Description