Creating 3G Wan Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

Creating 3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, proceed to the 3G modem menu and enter the PIN code on the
page displayed (see the 3G Modem section, page 146). Then proceed to the Net / WAN page, click
the Add button, and select the 3G value from the Connection Type drop-down list.
Figure 73. The page for creating a new connection. The General settings and 3G modem sections.
Parameter
Provider
Interface
Name
Enable
Direction
General settings
To automatically specify all settings required to connect to the
Internet, select your country and operator from the drop-down list.
To specify all settings independently, leave the Manually value.
Select the USB value.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
3G modem
Page 99 of 182
Configuring via Web-based Interface
Description