Download Print this page

D-Link DSL-2750U Setup

Hide thumbs

Advertisement

DSL-2750U Storage
Setup

Advertisement

loading

  Also See for D-Link DSL-2750U

  Related Manuals for D-Link DSL-2750U

  Summary of Contents for D-Link DSL-2750U

  • Page 1 DSL-2750U Storage Setup...
  • Page 2 Power Adapter Connection Plug the 3-Pin Power Supply/ Lightning Protection unit into the wall outlet and then connect the other end of it (12VDC IN) POWER UP your Business...
  • Page 3: Lan Connection

    LAN CONNECTION POWER UP your Business...
  • Page 4 LAN Connection Connect the Ethernet LAN Cable to any (yellow) port on the Router and connect the other end to the LAN port of the PC POWER UP your Business...
  • Page 5 CONNECTING TO THE UNIT VIA WEB GUI POWER UP your Business...
  • Page 6 Connecting to the unit via Web GUI How to login to Unit using the Web GUI 1. Go to your Internet Explorer or Default Browser. 2. In your URL field, type the Default IP (10.0.0.2) of router. 3. A login page will appear and you will be prompted for a Username and Password these are both “admin”...
  • Page 7 Connecting to the unit via Web GUI Username: admin Password: admin...
  • Page 8 Storage Setup Setting up a USB external hard drive or flash drive as a shared storage facility. POWER UP your Business...
  • Page 9 · Please make sure the unit is on the latest firmware. You can download the firmware at ftp.dlinktech.co.za . If you are still unsure as to which firmware to download, then simply e-mail your query to support@d-link.co.za or call the D-Link Africa offices on +27 (0)12 661 2025/3 Setup: ·...
  • Page 10 Note the volumeName of the stoage device.
  • Page 11 Enter a username, e.g. Andre and a password, e.g. 12345 which will be used when accessing the storage device from another location. Enter the volume name as noted Storage Device Info and enter this into volumeName.
  • Page 12 · Open the RUN command and enter the following details, · In this example it will be the following \\10.0.0.2\Marilizet Insert the Username and Password you selected and Click OK. ·...
  • Page 13 · You should now have access to the hard drive,...