D-Link DSL-2750U User Manual page 58

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Figure 41. Configuring Dynamic IP WAN connection. The expert settings mode. The Miscellaneous and
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Allow to create several
connections assigned
to this port
VLAN sections.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests
from the external network through this connection. For security
reasons, it is recommended not to select this checkbox.
VLAN
Select the checkbox to allow the router to use several untagged
connections.
Page 58 of 182
Configuring via Web-based Interface
Description