D-Link DSL-2750U User Manual page 47

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Allow to create several
connections assigned
to this port
Use VLAN
VLAN ID
VLAN priority
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
VLAN (displayed for the PPPoE type only)
Select the checkbox to allow the router to use several untagged
connections.
Select the checkbox to allow the router to use tagged VLAN
connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN checkbox is selected.
Page 47 of 182
Configuring via Web-based Interface
Description