D-Link DSL-2750U User Manual page 116

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When
the checkbox is selected, the Information and Connection sections are available on the page.
Parameter
Default PIN code
WPS Status
SSID
Network Authentication The network authentication type specified for the WLAN.
Encryption
Encryption key
Refresh
Factory PIN
Reset to unconfigured
WPS Method
PIN Code
Connect
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
The state of the WPS function:
Configured (all needed settings are specified; these settings
•
will be used upon establishing the wireless connection)
Unconfigured (after activating the WPS function, needed
•
settings will be configured automatically: the MAC address of
the wireless interface will be added to the SSID, the network
authentication type will be changed to WPA2-PSK with a
random encryption key).
The name of the router's WLAN.
The encryption type specified for the WLAN.
The encryption key specified for the WLAN.
Click the button to refresh the data on the page.
Click the button to restore the factory PIN code of the router.
Click the button to reset the parameters of the WPS function.
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 116 of 182
Configuring via Web-based Interface
Description