Remote Update - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

Remote Update

!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
To update the firmware of the router remotely, follow the next steps:
1. On the System / Firmware upgrade page, in the Remote update section, click the
Check updates button to check if a newer firmware version exists.
2. Click the OK button in the window displayed to upgrade the firmware of the router. Also
you can upgrade the firmware of the router by clicking the Remote update button in the
bottom right corner of the page (the button is displayed if a newer version of the firmware is
available).
3. Wait until the router is rebooted (about one and a half or two minutes).
4. Log into the web-based interface using the login (admin) and the current password.
5. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
6. Wait until the router is rebooted. Log into the web-based interface, using the default IP
address, login and password (192.168.0.1, admin, admin).
After the upgrade is completed, the new version of the firmware will be displayed in the Firmware
version field in the top left corner of the page.
Page 169 of 182
Configuring via Web-based Interface