D-Link DSL-2750U User Manual page 126

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Ports
WAN connections
Click the Apply button.
To edit or remove an existing group, select the relevant group on the Advanced / Interface
grouping page. On the page displayed, change the parameters and click the Apply button, or click
the Delete button. When you delete a group, interfaces assigned to it are reassigned to the
DEFAULT group.
In this section the LAN ports of the router are displayed. Ports which
cannot be added to the group are highlighted in red.
To add a port to the group, click the icon corresponding to this port.
Ports added to the group are highlighted in green.
To remove a port from the group, click the icon corresponding to this
port.
In this section WAN connections of the router are displayed.
Connections which cannot be added to the group are highlighted in
red.
To add a connection to the group, click the icon corresponding to
this connection. The connection added to the group is highlighted in
green.
To remove a connection from the group, click the icon
corresponding to this connection.
Page 126 of 182
Configuring via Web-based Interface
Description