Ipoa Or Static Ip Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

IPoA or Static IP Connection

In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode.
bottom left corner of the page (for a detailed description of all the connection's parameters, see the
Creating ADSL WAN Connection section, page 72 when creating ADSL WAN connection or the
Creating Ethernet WAN Connection section, page 80 when creating Ethernet WAN connection).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 55).
Figure 30. Configuring Static IP WAN connection.
Page 48 of 181
Configuring via Web-based Interface
To do this, use the switch in the