Routing - D-Link DSL-2750U User Manual

Wireless n adsl2+ usb modem router
Hide thumbs Also See for DSL-2750U:
Table of Contents

Advertisement

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

Routing

On the Advanced / Routing page, you can add static routes (routes for networks that are not
connected directly to the device but are available through the interfaces of the device) into the
system.
To create a new route, click the Add button. In the line displayed, you can specify the following
parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
After specifying the needed parameters, click the Apply button.
Figure 95. The Advanced / Routing page.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be
accessed. The field is available when the <Auto> value is selected
from the Via Interface drop-down list of this line.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the <Auto> value of this drop-down list, the router itself
sets the interface on the basis of data on connected networks.
Page 130 of 182
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

Table of Contents