Samba - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

Samba

On the USB storage / Samba page, you can enable the built-in Samba server of the router to
provide access to the USB storage for users of your LAN.
You can enable the Samba server only when a USB storage is connected to the router (in this case,
the Connected value is displayed in the USB storage field). To enable the Samba server, select
the Enable checkbox.
In the Workgroup field, leave the value specified by default (WORKGROUP) or specify a new name
of a workgroup participants of which will have access to the content of the USB storage.
In the NetBIOS field, specify a new name of the USB storage for identification in your LAN. Use
digits and/or Latin characters.
After specifying the needed parameters, click the Apply button.
To allow access to the content of the USB storage for users of your LAN, proceed to the System /
Users page and create needed accounts.
To disable the built-in Samba server of the router, deselect the Enable checkbox and click the
Apply button.
Figure 111. The USB storage / Samba page.
Page 153 of 182
Configuring via Web-based Interface