Configuring The Maximum Lifetime For Routes In The Fib; Displaying And Maintaining A Routing Table - HP VSR1000 Configuration Manual

Virtual services router
Table of Contents

Advertisement

Configuring the maximum lifetime for routes in the
FIB
When GR is disabled, FIB entries must be retained for some time after a protocol process switchover or
RIB process switchover. When GR is enabled, FIB entries must be removed immediately after a protocol
or RIB process switchover to avoid routing issues. Perform this task to meet such requirements.
To configure the maximum lifetime for routes in the FIB (IPv4):
Step
1.
Enter system view.
2.
Enter RIB view.
3.
Create a RIB IPv4 address
family and enter its view.
4.
Configure the maximum
lifetime for IPv4 routes in the
FIB.
To configure the maximum lifetime for routes in the FIB (IPv6):
Step
1.
Enter system view.
2.
Enter RIB view.
3.
Create a RIB IPv6 address
family and enter its view.
4.
Configure the maximum
lifetime for IPv6 routes in the
FIB.

Displaying and maintaining a routing table

Execute display commands in any view and reset commands in user view.
Task
Display routing table information.
Display information about routes
permitted by an IPv4 basic ACL.
Display information about routes to a
specific destination address.
Display information about routes to a
range of destination addresses.
Command
system-view
rib
address-family ipv4
fib lifetime seconds
Command
system-view
rib
address-family ipv6
fib lifetime seconds
Command
display ip routing-table [ vpn-instance vpn-instance-name ]
[ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ] acl
acl-number [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address [ mask | mask-length ] [ longer-match ] [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ]
ip-address1 to ip-address2 [ verbose ]
5
Remarks
N/A
N/A
By default, no RIB IPv4
address family is created.
By default, the maximum
lifetime for routes in the FIB is
600 seconds.
Remarks
N/A
N/A
By default, no RIB IPv6
address family is created.
By default, the maximum
lifetime for routes in the FIB is
600 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents