HP VSR1000 Configuration Manual page 215

Step
4. Specify the AS number of
the group.
5. Add an IPv6 BGP peer into
the EBGP peer group.
6. (Optional.) Configure a
description for the peer
group.
7. Create the BGP IPv6
multicast address family and
enter its view.
8. Enable the router to
exchange IPv6 unicast
routing information used for
RPF check with peers in the
specified peer group.
To configure an EBGP peer group by using Method 2 (IPv4 unicast address family):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Create an IPv4 BGP peer and
specify its AS number.
5. Add the peer into the EBGP
peer group.
6. (Optional.) Configure a
description for a peer group.
Command
peer group-name as-number
as-number
peer ipv6-address group
group-name [ as-number
as-number ]
peer group-name description
description-text
address-family ipv6 multicast
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ip-address as-number
as-number
peer ip-address group group-name
[ as-number as-number ]
peer group-name description
description-text
203
Remarks
By default, no AS number is
specified.
If a peer group contains peers, you
cannot remove or change its AS
number.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer group-name
as-number as-number command.
By default, no description is
configured for the peer group.
By default, the BGP IPv6 multicast
address family is not created.
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check
with the peers in the group.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no IPv4 BGP peer is
created.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
By default, no description is
configured for the peer group.