Displaying And Maintaining Ripng; Ripng Configuration Examples; Basic Ripng Configuration Example - HP VSR1000 Configuration Manual

Step
2. Enter interface view.
3. Apply an IPsec profile to the
interface.

Displaying and maintaining RIPng

Execute display commands in any view and reset commands in user view.
Task
Display configuration information of a RIPng
process.
Display routes in the RIPng database.
Display the routing information of a specified
RIPng process.
Display RIPng interface information.
Reset a RIPng process.
Clear statistics of a RIPng process.

RIPng configuration examples

Basic RIPng configuration example

Network requirements
As shown in
filter the route (2::/64) learned from Router A, which means the route will not be added to the routing
table of Router B, and Router B forwards only the route 4::/64 to Router A.
Figure 85 Network diagram
Configuration procedure
1. Configure IPv6 addresses for interfaces. (Details not shown.)
2. Configure basic RIPng:
# Configure Router A.
Figure 85, all routers learn IPv6 routing information through RIPng. Configure Router B to
Command
interface interface-type
interface-number
ripng ipsec-profile profile-name
Command
display ripng [ process-id ]
display ripng process-id database [ ipv6-address prefix-length ]
display ripng process-id route [ ipv6-address prefix-length
[ verbose ] | peer ipv6-address | statistics ]
display ripng process-id interface [ interface-type
interface-number ]
reset ripng process-id process
reset ripng process-id statistics
359
Remarks
N/A
By default, no IPsec profile is
applied.