HP VSR1000 Configuration Manual page 218

Step
8. Enable the router to
exchange IPv6 unicast
routing information used for
RPF check with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv4 unicast address family):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Add a peer into the EBGP
peer group.
5. (Optional.) Configure a
description for the peer group.
Create the BGP IPv4 unicast
6.
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
7. Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv6 unicast address family):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Add a peer into the EBGP
peer group.
Command
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ip-address group group-name
as-number as-number
peer group-name description
description-text
address-family ipv4 [ unicast ]
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ipv6-address group
group-name as-number as-number
206
Remarks
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check with
the peers in the group.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no peer exists in the
peer group.
By default, no description is
configured for the peer group.
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no peer exists in the
peer group.