Displaying And Maintaining Static Routes - HP VSR1000 Configuration Manual

Step
2. Configure static route
FRR.
Configuring static route FRR to automatically select a backup next hop
Step
1. Enter system view.
2. Configure static route FRR to
automatically select a backup next
hop.
Enabling BFD echo packet mode for static route FRR
By default, static route FRR does not use BFD to select primary link failures. Perform this task to enable
static route FRR to use BFD echo packet mode for fast failure detection on the primary link.
To enable BFD echo packet mode for static route FRR:
Step
1. Enter system view.
2. Configure the source IP
address of BFD echo packets.
3. Enable BFD echo packet
mode for static route FRR.

Displaying and maintaining static routes

Execute display commands in any view.
Command
•
Method 1:
ip route-static dest-address { mask-length |
mask } interface-type interface-number
[ next-hop-address [ backup-interface
interface-type interface-number
[ backup-nexthop
backup-nexthop-address ] ] ] [ permanent ]
[ preference preference-value ] [ tag
tag-value ] [ description description-text ]
•
Method 2:
ip route-static vpn-instance
s-vpn-instance-name dest-address
{ mask-length | mask } interface-type
interface-number [ next-hop-address
[ backup-interface interface-type
interface-number [ backup-nexthop
backup-nexthop-address ] ] ] [ permanent ]
[ preference preference-value ] [ tag
tag-value ] [ description description-text ]
Command
system-view
ip route-static fast-reroute auto
Command
system-view
bfd echo-source-ip ip-address
ip route-static primary-path-detect
bfd echo
11
Remarks
Use either method.
By default, static route FRR is
not configured.
Remarks
N/A
By default, static route FRR is
disabled.
Remarks
N/A
By default, the source IP address of
BFD echo packets is not
configured.
By default, BFD echo packet mode
for static route FRR is disabled.