Radio/Electrical; Hardware Identification; Table Of Contents; Fuel Bottle - Team Losi XXX-NT Sport Owner's Manual

Refer to the included JR Propo XR2i owners manual for specific technical information.
When in question, use the hardware identification guide in each step. For screws, the prefix number designates the
screw size and number of threads per inch (i.e., 4-40 is #4 screw with 40 threads per inch of length). The fraction
following designates the length of the threads for cap head screws, and the overall length for flathead screws. Bearings
and bushings are referenced by the inside diameter x outside diameter. Shafts and pins are diameter x length. Washers
are described by inside diameter or the screw size that will pass through the inside diameter. E-clips are sized by the shaft
diameter that they are attached to.
The fuel used to power the XXX-NT Sport truck is a special blend of methanol, oils, and nitromethane. This fuel is highly
flammable and should be treated with extreme caution. Be sure to read any warnings and cautions that appear on the
packaging of the fuel. Because exhaust fumes are produced from running fuel powered models, this model should not be
operated indoors. Be careful when handling your truck while the motor is running. Avoid pointing the exhaust outlet
towards your face. The exhaust fumes can cause irritation and burning of the eyes.
There are a number of different brands of model fuels available. We have found that fuels specially blended for R/C car
use like Blue Thunder, Trinity, and Orion perform better than common model airplane or helicopter fuels. Model airplane
fuels usually do not have the proper type or amount of oil needed for the extreme demands of R/C car racing.
You will need some sort of a fuel bottle in order to fill the tank in your XXX-NT Sport with fuel. Your local hobby shop
should have fuel bottles available.
1. INTRODUCTION ..................................................................... i
Completed Kit Dimensions ................................................ i
Notes & Symbols ................................................................ i
Kit Manual Organization ..................................................... i
Important Safety Notes ....................................................... i
Tools Required ..................................................................... i
Radio/Electrical .................................................................. ii
Hardware Identification ...................................................... ii
Fuel ...................................................................................... ii
Fuel Bottle ........................................................................... ii
Starters ................................................................................ ii
Glow Igniter ......................................................................... ii
Team Losi is continually changing and improving designs; therefore, the actual part may appear slightly different than the illustrated part. Illustrations of
parts and assemblies may be slightly distorted to enhance pertinent details.

HARDWARE IDENTIFICATION

Service and Technical questions
Radio & Engine:(877) 504-0233 (Horizon Hobby)
Chassis only:(909) 390-9595 (Team Losi)

TABLE OF CONTENTS

RADIO/ELECTRICAL

FUEL

FUEL BOTTLE

2. BAG A ................................................................................. 1-6
3. BAG B ............................................................................... 7-11
4. BAG C ............................................................................ 12-21
5. BAG D ............................................................................ 22-26
6. BAG E ............................................................................ 27-30
7. BAG F .................................................................................. 31
8. Engine Installation ........................................................ 32-39
9. Radio Installation .......................................................... 40-51
10. Final Assembly ................................................................... 52
11. Final Checklist .................................................................... 53
12. Tips from the Team ....................................................... 53-55
13. Spare parts .................................................................... 56-59
ii