Team Losi XXX-NT Sport Owner's Manual page 33

Figure 68
95
Step 22. Make sure that the dogbones are in the outdrives (47) before
continuing.
Step 23. Attach the bottom of a rear shock (the longer of the two
shocks) to the right rear arm (118) by snapping the shock end (133)
over the the shock mount swivel ball (134) that is already attached to
the right rear arm (118).
Step 24. Slide a short shock mount bushing (142), large side first, over
the screw (33) on the right side of the rear shock tower.
Step 25. Place the top of the shock body (138) over the shock mount
bushing (142) on the rear shock tower (123) and secure it with a 4-40
locknut (95).
*NOTE: Before attaching the top of the shock, make sure that
the dogbone is in place in the outdrive.
Step 26. Repeat Steps 23-25 for the left rear shock.
Figure 69
31
Step 27. Insert the shock end (134) of a front shock between the
shock mounting rails of the front suspension arm (48) and line up the
hole in the shock mount swivel ball (133) with the middle hole in the
arm (48).
Step 28. Attach the shock end (134) to the front arm (48) by threading
a 4-40 x 1/2" cap-head screw (31) all the way into the arm (48).
Step 29. Slide a long shock mount bushing (143), large side first, over
the screw (33) on the right side of the shock tower (34).
Step 30. Place the top of the shock body (137) over the shock mount
bushing (143) on the front shock tower (34) and secure it with a 4-40
locknut (95).
Step 31. Repeat Steps 27-30 for the left front shock.
BAG E (Continued)
142
143
95
33
95
137
143
48
31
3 0
138
142
118
133
134
Figure 68
95
134
Figure 69