Team Losi XXX-NT Sport Owner's Manual page 16

Table of Contents

Advertisement

Figure 30
63
Step 7. Insert a 5mm x 8mm bearing (63) into the center of the diff gear
(64).
Step 8. Press a 3/32" carbide diff ball (65) into each of the small holes
in the diff gear (64).
IMPORTANT NOTE: There are two sets of diff balls in
Bag C. Be certain to use the slightly larger balls that are packaged
alone (12 total) in Figure 30, Step 8. There is a second set of eight 5/
64" balls packaged with washers in the bag. These balls will be used
in Figure 32.
Figure 31
Step 9. Apply a fairly heavy coat of clear diff grease (62) to the ex-
posed side of the diff washer (61). Carefully place the diff gear (64)
over the male outdrive (60) so that the diff balls (65) and diff gear (64)
rest against the diff washer (61).
Figure 32
58
Step 10. Locate the diff adjusting screw (67) and place the foam thrust
bearing seal (68) over the shoulder of the screw (67).
Step 11. Place one beveled washer (58) over the diff screw (67) with
the concave surface facing away from the head of the diff screw (67).
Step 12. Place one of the 3mm x 8mm thrust bearing
washers (69) over the diff screw (67).
*NOTE: The thrust bearing washers are packaged in a small
bag along with the eight 5/64" thrust bearing balls.
Step 13. Grease the thrust washer (69) well with white thrust bearing/
assembly grease (71) and place the eight 5/64" thrust bearing balls
(70) on top of the washer (69), around the diff screw (67). Apply more
white thrust bearing/assembly grease (71) to the tops of the thrust
bearing balls (70). Place the second thrust washer (69) over the screw
(67) and against the thrust bearing balls (70).
Step 14. Very carefully insert the diff screw (67), with the thrust bear-
ing assembly installed, into the female outdrive (66). Pull the threaded
end of the diff screw (67) until the thrust bearing assembly rests
against the inside of the outdrive (66).
IMPORTANT NOTE: Ensure that all eight thrust bearing
balls remain in place between the two washers, around the diff screw.
BAG C (Continued)
65
68
67
64
65
60
GREASE
70
69
69
GREASE
Figure 32
1 3
63
Figure 30
61
Figure 31
70
67
Figure 32
65
64
66
58
68

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents