Scanner Emulation Parameter Defaults - Symbol LS 4208 Manual

10-4 LS 4208 Product Reference Guide

Scanner Emulation Parameter Defaults

Table 10-1 lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in
the
Scanner Emulation Host Parameters section beginning on page
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Beep Style
Parameter Pass-Through
Convert Newer Code Types
Module Width
Convert All Bar Codes to Code 39
Code 39 Full ASCII Conversion
Transmission Timeout
Ignore Unknown Characters
Leading Margin
Check for Decode LED
1
User selection is required to configure this interface and this is the most common selection.
Table 10-1. Scanner Emulation Default Table
Parameter
page 10-5
for all user preferences, hosts, symbologies, and
Default
Beep on Successful Transmit
Parameter Process and Pass
Through
Convert Newer Code Types
20 µs
Do Not Convert Bar Codes to Code
39
Disable
3 Sec
Ignore Unknown Characters
2 ms
Check for Decode LED
.
Page
Number
10-5
10-6
10-6
10-7
10-7
10-7
10-8
10-9
10-9
10-10