Codabar (Nw - 7); Enable/Disable Codabar; Set Lengths For Codabar - Symbol LS 4208 Manual

12-40 LS 4208 Product Reference Guide

Codabar (NW - 7)

Enable/Disable Codabar

To enable or disable Codabar, scan the appropriate bar code below.
Enable Codabar

Set Lengths for Codabar

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains.
Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only Codabar symbols containing a selected length. Select the length ·
using the numeric bar codes in
characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the
selection, scan Cancel on page
Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two selected lengths.
·
Select lengths using the numeric bar codes in
containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct
an error or to change the selection, scan Cancel on page D-4.
Length Within Range - Select this option to decode a Codabar symbol with a specific length range. Select lengths
·
using numeric bar codes in
between 4 and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers
must always be preceded by a leading zero). To correct an error or change the selection, scan Cancel on page D-4.
Any Length - Scan this option to decode Codabar symbols containing any number of characters within the scanner
·
capability.
Appendix D, Numeric Bar Codes
D-4.
Appendix D, Numeric Bar Codes
Appendix D, Numeric Bar Codes .
*
Disable Codabar
. For example, to decode only Codabar symbols with 14
. For example, to decode only Codabar symbols
For example, to decode Codabar symbols containing