Unpacking; Setting Up The Scanner; Installing The Interface Cable - Symbol LS 4208 Manual

1-4 LS 4208 Product Reference Guide

Unpacking

Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, call the
Center
at one of the telephone numbers listed on
used
if the equipment ever needs to be return for servicing.

Setting Up the Scanner

Installing the Interface Cable

To connect the interface cable:
1. Insert the interface cable's modular connector clip into the cable interface port on the bottom of the scanner handle.
(See Figure 1-2.).
2. Gently tug the cable to ensure the connector is properly secured.
3. Connect the other end of the interface cable to the host. (See the specific host chapter for information on host connections.)
page xvi. KEEP THE PACKING. It is the approved shipping container and should be
Cable interface
port
dular
Interface cable modular
Symbol Support