Avaya 4600 Series Administrator's Manual page 79

endptNVL2Q OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if the Layer 2
::= { endptNVM 12 }
endptNVL2QAUD OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM Audio priority. This variable returns an integer
::= { endptNVM 13 }
endptNVL2QSIG OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM Signaling priority. This variable returns an integer
::= { endptNVM 14 }
endptNVL2QVLAN OBJECT-TYPE
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "NVM VLAN Identifier. This variable returns an integer
::= { endptNVM 15 }
endptMaintenance
endptUPGRADESCRIPT
SYNTAX
MAX-ACCESS read-only
STATUS
DESCRIPTION "Script loading status flag. This variable returns '0' if the
::= { endptMaintenance 1 }
endptAPPSTAT OBJECT-TYPE
SYNTAX
INTEGER
current
802.1Q framing parameter in NVM is OFF, else 1."
INTEGER
current
between 0 and 7 inclusive specifying the Layer 2 802.1Q audio priority
value stored in NVM."
INTEGER
current
between 0 and 7 inclusive specifying the Layer 2 802.1Q signaling priority
value stored in NVM."
INTEGER
current
between 0 and 4095 inclusive specifying the Layer 2 802.1Q VLAN
Identifier value stored in NVM."
OBJECT IDENTIFIER ::= { endpointMIB 3 }
OBJECT-TYPE
INTEGER
current
upgrade script (endpt46XXUPGR) was successfully obtained and interpreted
since the last power-up or reset. This variable returns 1' if the upgrade script
was successfully obtained and but NOT variable successfully interpreted
since the last power-up or reset. This returns '2' if the upgrade script was
NOT successfully obtained since the last power-up or reset."
INTEGER
Avaya - 46xx IP Telephone MIB
Appendix
A-9