Avaya 4600 Series Administrator's Manual page 48

4600 Series IP Telephone LAN Administrator's Guide
4. Enter the following values in the fields:
Field
Name
Data Type
Code
Description
5. Click the Add button and then the Edit Array button.
The IP Address Array Editor dialog box is displayed.
6. Enter the IP Address(es) for TFTP Server(s) which are normally housed on the DEFINITY
system.
7. Click the OK button.
The Predefined Options and Values dialog box is displayed.
8. Click the OK button.
The Predefined Options and Values dialog box is closed, leaving the DHCP dialog box
enabled.
9. Expand the newly created scope to reveal its Scope Options.
10. Click Scope Options and select Action->Configure Options from the menu.
11. In the General tab page, under the Available Options, check the 176 Site-Specific Options
checkbox.
12. In the Data Entry box, enter the DHCP IP telephone option string as described in ''Generic
Setup'' on page 4-4.
You can enter the text string directly on the right side of the Data Entry box under the
ASCII label.
13. From the list in Available Options, check option 003 Router.
14. Enter the gateway (router) IP address as recorded in the IP Address field of Table 4-1.
15. Click the Add button.
16. Click the OK button.
DHCP
4-12
Value
TFTP Server IP Address
IP Address
150
TFTP IP Address for DEFINITY Devices