Backguard Installation; Step 8: Backguard Installation; Flame Characteristics; Step 9: Proper Flame Sizes - DCS RGSC-305SS Installation Manual

STEP 8: BACKGUARD INSTALLATION

The backguard must be installed when there is less
than a 12" clearance between combustibles and the
back of the range (above the cooking surface) (See
Fig. 3, page 5).
BACKGUARD KITS:
The backguard is located, as shown in Fig. 14.
Secure the backguard to the wall behind the range.
Specific instructions for installation of the full
backguard or low backguard can be found packaged
with the backguard.

STEP 9: PROPER FLAME SIZES

OVEN BURNER
1-1/2" - 2"
FIG. 15
SEALED TOP BURNER LIGHTING
NOTE:
The sealed top burners have an infinite
number of heat settings and there are no
fixed positions on the control knobs
between HI and LO. To turn the sealed top
burner on, push in on the control knob and
turn it counterclockwise to the "LITE"
position. An audible clicking sound will be
heard. When the gas has been ignited by
the electronic spark igniter, turn the knob
to the desired setting.

BACKGUARD INSTALLATION

Wall Mount Full Backguard
(30")
(Model No. BGS-3030)
Wall Mount Low Backguard
(12")
(Model No. BGS-1230)

FLAME CHARACTERISTICS

INFRARED BROIL BURNER
BLUE FLAME
FIG. 16
COOKTOP BURNER
FIG. 17
12
FIG. 14
1-1/2"