Mounting Unit On Wall; Environmental Conditions - Lathem 6000E User Manual

Mounting Unit on Wall

The unit can be mounted on a wall using the supplied mounting fittings. To mount the
unit on a wall, take the following steps:
1
Install the two larger screws into a wall
10 cm (3.94") apart. Be sure to keep about
3 mm (0.12") of the screw head out of the
wall.
The supplied screws are intended
for use on a thick wooden wall or
wooden column.
them on any other materials.
There is a danger that the unit
may come off etc.
2
Mount the wall mount fittings
as shown on the right.

Environmental Conditions

Avoid placing the unit in environments that are:
humid or dusty
exposed to direct sunshine
subject to frequent or continuous vibrations
outside the temperature range between -5˚ and 45˚C
affected by chemicals or ozone
Do not use
6