Lathem 900E User Manual

Lathem Time Corporation
Thank you for purchasing our time clock.
For safe and proper operation, please carefully read the manual
before using the time clock and save it for reference.
F
eatures:
Main applications: Payroll/job cost recorder or time stamp
•
• • •
Quartz time clock 12 or 24-hour format
•
•
• •
Dot matrix printer Regular minute, 1/10, 1/60,
•
•
•
Perpetual calendar • 1/100 or 5/100 of an hour
•
•
• •
Automatic daylight saving time 13 preprogramed comments
•
•
• •
Prints in 3 languages • Digital LCD display (Date, Hour,
•
•
Minute, Day of the week indication)
•
•
•
C
aution:
Avoid placing the unit in environments that are:
• humid or dusty.
• exposed to direct sunshine.
• subject to frequent or continuous vibrations.
• outside the temperature range between +25˚F and 113˚F
( -5˚C and 45˚C ).
• affected by chemicals or ozone.
Place the time clock close to the wall outlet so that it is easily
accessible to disconnect.
Do not put a heavy object on the clock, or not forcefully press the
cover of the clock. It may cause mechanism trouble and danger
especially when the unit is hung on the wall.
For questions about the operation of this time clock, or to order
supplies and accessories, please contact Lathem Time at
(800)241-4990.
q
WARNING
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his or her own expense.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS A LIMITS FOR RADIO NOISE EMISSIONS
FROM DIGITAL APPARATUS AS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE
CANADIAN DEPARTMENT OF COMMUNICATIONS.
LE PRÉSENT APPAREIL NUMÉRIQUE N'ÉMET PAS DE BRUITS RADIOÉLECTRIQUES DÉPASSANT LES
LIMITES APPLICABLES AUX APPAREILS NUMÉRIQUES DE CLASSE A PRESCRITES DANS LE
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE ÉDICTÉ PAR LE MINISTÈRE DES
COMMUNICATIONS DU CANADA.
1. The details of this User's Manual are subject to change even without previous notification.
2. This User's Manual has been prepared with the utmost care to cover all aspects of the time
clock's use.
3.
Be sure to use your time clock after you have fully understood the hardware and software
specifications and limits.
4. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form or by any means, mechanical, photocopying, recording or otherwise.
This User's Manual and its contents are copyrighted by LATHEM
TIME CORP. with all rights reserved.
Lathem Time Corporation
www. lathem. com
(800) 241-4990
BEFORE USING THE TIME CLOCK
Accessories
Key Ribbon cassette
User's manual Wall-mount fittings
Screws (2 pcs.)
Configuration
<Cover off>
<Front view>
Control buttons
Cover
Key hole
Display
Display Ribbon cassette
Print head
<Back view>
Wall-mount holes
AC adapter
w
PRECAUTIONS
This user's manual is prepared for safe and proper use of the unit.
Please follow all the instructions to avoid possible danger to yourself or
others and damage to the unit.
Signs
Various warnings and cautions are provided throughout this manual along with signs.
Remember each sign and its explanation listed below for your safety and proper
operation of the unit.
Improper handling may cause bodily accidents including
Warning
death and serious injury.
Caution
Improper handling may harm the human body or material.
Improper handling may cause electric
"Must-Do" sign.
shock DANGER.
Be sure to remove the line cord plug
DO NOT disassemble the unit.
from the outlet.
"Don't" sign.
Warning
Do not disassemble the unit. There is a high voltage present inside, possibly leading to an
electric shock.
Do not modify the unit. Modifications may cause a fire and/or electric shock.
If any anomaly occurs, for example, heat or smoke is generated or an odor is emitted, unplug
the unit immediately and contact your dealer for servicing. There is a danger that further use
may cause a fire or electric shock.
Do not use any voltage of the power source other than designated.
Do not share a single outlet with another plug. These may lead to fire or shock hazards.
Do not damage, break, or modify the power cord. Do not put a heavy object on, pull, or
forcefully bend the cord, either. These may damage the cord, possibly resulting in a fire or
electric shock.

QUICK EASY SETUP

NOTICE: Install the RIBBON CASSETTE before you plug the AC adapter into the AC outlet.
To install the RIBBON CASSETTE , please refer to the step 3 and following steps in
the "REPLACING THE RIBBON CASSETTE".
To setup your time clock, follow next steps:
S 1 S 2
tep tep
Unlock the key and remove the cover.
Install the RIBBON CASSETTE , and
plug the AC adapter into the time clock.
S 4
S 3 tep
tep
Plug the AC adapter into the AC outlet
Replace the cover.
and insert a card.
AC outlet
AC adapter
Card
e
If foreign matter should get in the unit (including a piece of metal, water, or liquid), disconnect
the plug from the outlet immediately and contact your dealer for servicing. There is a danger
that further use may cause a fire or electric shock.
Do not plug or unplug the unit with a wet hand. You may get an electric shock.
Caution
Do not place the unit on an uneven or tilted surface. This may result in injuries due to the unit
dropping or falling off.
Do not put a water-filled container or a metal object on top of the unit. If water is spilled or the
metallic object slips inside, a fire or shock hazard may occur.
Do not install the unit in a humid or dusty environment. It may cause a fire or electric shock.
Do not place the unit near kitchen counter or humidifier. Oil, smoke, or steam generating from
them may cause fire or shock hazards.
Do not yank the power cord to disconnect from the outlet. Hold the plug with your hand to do
so, or the cord may be damaged, possibly leading to a fire or electric shock.
Remove the line cord plug from the outlet before transferring the unit, or it may damage the
cord, possibly leading to a fire or electric shock.
Be careful not to contact the print head, as you may get hurt or burned.
Make sure to insert the power plug as far as it will go. Improper insertion of the plug may
develop fire or shock hazards.
Do not insert or drop any other time card than specified into the slot. Such misuse may cause a
fire or electric shock.
If the unit should be dropped or the case be broken, unplug the unit and contact your dealer for
servicing. Further use may lead to a fire or shock hazard.
Daily Care
For cleaning, turn the power off and wipe the case clean of dust and dirt with a dry
cloth, etc.

WALL MOUNTING

Caution: The supplied screws are intended for use on a thick wooden wall or wooden column.
Do not use them on any other materials. The time clock may come off if used on other materials.
S 1
tep
(Upper side)
Install the supplied wall-mount screws
into a wall by using the template.
Be sure to keep about 1/4" of the screw
head away from the wall.
Please use the template attached to this
manual.
S 2
tep
Unlock the key and remove the cover.
And then hang it on the wall.
S 3
tep
Replace the cover.
r