Lathem Airtime AT-DDC4 Installation & User Manual
Wireless digital wall clock
Hide thumbs
Also See for Airtime AT-DDC4:
- Installation & user manual (9 pages) ,
- Installation & user manual (14 pages)
Related Manuals for Lathem Airtime AT-DDC4
Summary of Contents for Lathem Airtime AT-DDC4
- Page 3 Page 1...
- Page 4 Page 2 Jumper J1 On = 12 Hour display Off = 24 Hour display...
- Page 5 Page 3...
- Page 6 Page 4 » Note: If mounting near a ceiling, make sure the holes are at least 2 1/4" away from the ceiling. Note: Make sure you have at least 16" of side clearance on one side in order to remove the front panel. »...
- Page 7 Page 5 Note: If mounting near a ceiling, make sure the top of the single gang box is at least 2 1/4" away from the ceiling. Note: Make sure you have at least 16" of side clearance on one side in order to remove the front panel.
- Page 8 Page 6 » » Note: The long dimension of the mounting plate must be perpendicular to the ground to assure proper alignment of wall clocks. Mounting - Wall » » » »...
- Page 9 Page 7 » » » » mounting plate modified end caps DDC4 cases end cap support #10 hex nuts #10 lock washers chase nipples #10 lock washers #10 screws...
- Page 10 Page 8 » » Note: When mounting AT-DDC4 clocks, the long dimension of the mounting plate must be parallel to the long side of the clocks. Mounting - Ceiling Note: Make sure you have at least 16" of side clearance on one side in order to remove the front panel assembly.
- Page 11 Page 9 mounting plate #10 hex nuts D DC4 cases chase nipple chase nipple #10 screws #10 lock washers...
- Page 12 Page 10...
- Page 13 Page 11...
Need help?
Do you have a question about the Airtime AT-DDC4 and is the answer not in the manual?
Questions and answers