Mounting The Pc100 - Lathem PC100-R Installation & User Manual

C H A P T E R 2

Mounting the PC100

Check your package contents to make sure everything is accounted for before
starting. Decide where to mount your clock. Keep in mind that the AC adapter
plugs into a wall outlet.
To mount the clock, you need the following items:
Drill with a 5/16" bit
Hammer
Phillips head screwdriver
Pencil
1. Screw the mounting bracket to the wall
Hold the bracket against the wall so the
»
top (arrow pointing Up) is 54 inches from
the floor
Mark the 3 holes with a pencil
»
Remove the bracket and drill a 5/16-inch
»
hole at each mark
Insert an anchor into each hole, tapping it
»
with a hammer until it is flush against the
wall
Align the mounting bracket back on the wall
»
Insert each screw through the bracket into the anchors, and tighten
»
securely
PC100 Terminal User's Guide
2