3.6
R
EMOTE CONTROL CONNECTION
Phoenix inverters can be switched 'on', 'off' and 'economy' by remote
control. In addition all five indicator LED's can also be remotely
connected. Illustration 3 illustrates how to make the connections.
Alternatively a complete remote control panel, incorporating the indicator
LED's and 'on/off/economy' switch is available from Victron Energy.
3.7
V
ARIOUS POINTS OF ATTENTION
The rms value of the ripple voltage at the input should be limited to
maximum 10% of the DC input voltage.
Never use a battery charger as a power supply for these Victron Energy
inverters, unless batteries or a suitable ripple suppressor are connected.
manual
Illustration 3.
19