Getting Ready To Receive Data From A Computer - Roland VersaEXPRESS RF-640 User Manual

Printing

Getting Ready to Receive Data from a Computer

When  P. 21, "Loading Media",
from a computer.
CAUTION
2
Procedure

Close the front cover.

ake sure
M
If the light does not come on, lower the loading lever.

Wait until

Make sure the top menu is displayed.
If the top menu is not displayed, press
Printing is not possible in these situations.
 The machine does not run when the front cover is open.
 Never open the front cover when printing is in progress. Doing so interrupts printing.
 Data from the computer is not accepted when
 When "ON" is set to the print heater and/or the dryer, printing does not start until
 Data from the computer is not accepted when you are not at the top menu.
42
P. 33, "Setup of Media" are completed, get ready to receive the data

Never touch the print-head carriage while print is in progress.
The print-head carriage moves at high speed. Contact may cause injury.
stays steadily lit.
stays steadily lit.
several times.
Top
menu
Steadily
lit
is dark.
Flashing
Steadily lit
lights up.