Using An Optional Dryer - Roland VersaEXPRESS RF-640 User Manual

Description
Set the interval after the 1st page is printed. The next operation is not started until the set time passes.
is lighting during the interval. When pressing
finished and the next operation is started. When holding on
canceled. You can also make this setting on the software RIP. When you have made the setting on the software,
the software's setting is used.
Default Setting
[DRYING TIME]: 0 min

Using an Optional Dryer

Procedure

Press .

MENU
HEATER MENU

HEATER MENU
OPTION DRYER

OPTION DRYER
DISABLE ENABLE

Press to go back to the original screen.
Description
This switches the optional dryer "ENABLE" or "DISABLE".
When using an optional dryer, set [OPTION DRYER] to "ENABLE". You can speed up drying of the ink more.
Contact your authorized Roland DG Corp. dealer or us for recommended dryer models. For the details of how
to use an optional dryer, refer to the documentation for the dryer you're using.
Default Setting
[OPTION DRYER]: DISABLE
Press several times until the screen on the left appears.
Press , and then
Press .
Use to select "ENABLE."
Press to enable the setting.
Fully Utilize the Media Heating System
while is lighting, the interval is
while is lighting, printing is
twice.
4
83