Other Problems; The Machine Doesn't Run - Roland VersaEXPRESS RF-640 User Manual

Other Problems

The Machine Doesn't Run

Is the cable connected?
Connect the cable securely.
 "Setup Guide"
Is the power switched on?
Switch on the main power, then press the sub power switch and make sure the sub power switch lights up.
 P. 20, "Switch On!"
Are the covers open?
Close Front Cover, Cover L and Cover R.
Is lit up?
Printing is not performed when
 P. 42, "Getting Ready to Receive Data from a Computer"
Is the top menu displayed?
Top menu
If the top menu isn't displayed, printing doesn't start even when data is sent from the computer. To go to the
top menu, press
 P. 42, "Getting Ready to Receive Data from a Computer"
Is a message displayed on the screen?
 P. 117, "A Message Appears"
 P. 119, "An Error Message Appears"
Is lit up?
6
When
resumes.
 P. 44, "Pausing and Canceling Printing"
114
is not lit. Lower the loading lever.
, then press
lights up, operation is paused. To resume, press
.
. goes dark and printing