Maximum Printing Area When Using Crop Marks
The maximum printing area when crop marks are used is reduced from the maximum printing area by an
amount equal to the crop marks when crop marks are not used.
12.5 mm
10 mm
Printing area
10 mm
12.5 mm
The Media-Cutoff Location During Continuous Printing
When a media-cutoff command is sent from the computer, the cutoff location on the media is as shown in
the figure below.
Location where
separated
Maximum printing area
Second page
First page
Printing Area
12.5 mm
10 mm
10 mm
12.5 mm
Crop mark
75 mm
Margin
(set value on the
software RIP)
7
125