Default Setting - Roland VersaEXPRESS RF-640 User Manual


Open the front cover.

If a fixed period of time passes while the setting is in process, the menu is forcefully
terminated.
If a fixed period of time passes while the setting is in process, the menu is forcefully terminated and
the print-head carriage is returned to the standby position to prevent them from drying out. In that
case, perform the step
To cancel ongoing setting for the location of right edge of media

Close the front cover.

SHEET POS
CANCEL

Press
The print-head carriage returns to the standby position (inside the cover R).

After positioning, close the front cover.
Press to enable the setting.
Description
For transparent media, the width and position cannot be automatically detected. Therefore, [SHEET TYPE]
must be set to "CLEAR" before the width and loaded position are set manually.
When [SHEET TYPE] is set to "CLEAR," printing does not stop if the media runs out while printing is in progress.
If media runs out while printing is in progress, immediately press
chance that the platen or the like may become soiled by ink or that ink may get inside and damage the machine.

Default Setting

[SHEET TYPE]: OPAQUE
[SHEET WIDTH]: 1625 mm
Accommodating to the Types and Condition of Media
Base point
mark
4.
again.
Press
.
Move the print-head carriage (base point
mark) to the right edge of the media using
.
The position indicated by the arrow of the base
point mark is set as the location of the right edge
of the media.
to display the screen on the left.
to quit printing. Otherwise, there is a
4
89