Print-head Carriage Stops Moving. Why?
If the print-head carriage stops over the platen, take action immediately to prevent the print
heads from drying out.
What to Do First
If the Print-head Carriage Still Does Not Move
Try switching off the main power, then again switching on the main power, followed by the sub power.
If the Print-head Carriage Still Does Not Move
If the print-head carriage still does not move, carry out the following emergency response measure, then
contact your authorized Roland DG Corp. dealer or us.
Procedure
Switch off the main power and open the front cover.
6
112
Screw
Cover R
Hook
Switch the sub power off, then back on
again.
If the media is jammed, then also remove
the media.
If the print-head carriage moves to the
standby position (inside the cover R), it
means the operation has ended success-
fully.
Remove the Cover R.