Grounding Generator To Truck Or Trailer Frame - Miller Bobcat 225 Owner's Manual

5-3. Grounding Generator To Truck Or Trailer Frame

1 2
GND/PE
3
.
A complete Parts List is available at www.MillerWelds.com
!
Always ground generator
frame to vehicle frame to pre-
vent electric shock and static
electricity hazards.
!
Also see AWS Safety &
Health Fact Sheet No. 29,
Grounding of Portable And
Vehicle Mounted Welding
Generators.
!
Bed liners, shipping skids,
and some running gear insu-
late the welding generator
from the vehicle frame. Al-
ways connect a ground wire
from the generator equip-
ment grounding terminal to
bare metal on the vehicle
frame as shown.
!
If unit does not have GFCI re-
ceptacles, use GFCI-pro-
tected extension cord.
1 Equipment Grounding
Terminal (On Front Panel)
2 Grounding Cable (Not
Supplied)
3 Metal Vehicle Frame
Connect cable from equipment
ground terminal to metal vehicle
frame. Use #10 AWG or larger
insulated copper wire.
.
Electrically bond generator
frame to vehicle frame by met-
al-to-metal contact.
rot_grnd 2008-01 − 800 652-D
OM-4434 Page 23