Changing Engine Oil, Oil Filter, And Fuel Filter (Kohler-Powered Units) - Miller Bobcat 225 Owner's Manual

8-7. Changing Engine Oil, Oil Filter, and Fuel Filter (Kohler-Powered Units)

Full
Tools Needed:
OM-4434 Page 44
3
1
.
A complete Parts List is available at www.MillerWelds.com
!
Stop engine and let cool.
1 Oil Drain Valve
2 1/2 ID x 7 in Hose
3 Oil Filter
Change engine oil and filter accord-
ing to engine owner's manual.
!
Close valve and valve cap
before
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 5-5).
4 Fuel Filter
5 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
!
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
4
5
2
adding oil and
803 754-D / S-0842