Transporting Machine; Storing Machine; Recommended Stock Items - Tennant 1610 Operator's Manual

TRANSPORTING MACHINE

When transporting the machine by use of trailer or
truck, be certain to follow tie--down procedures below:
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
1. Raise the scrub head to the transport position.
2. Load the machine using a recommended loading
ramp.
3. Position the front of the machine up against the
front of the trailer or truck. Once machine is
positioned, lower the scrub head and turn key off.
4. Set the parking brake and place a block behind
each drive wheel to prevent machine from rolling.
5. Place tie--down straps over the top of the machine
to prevent it from tipping. It may be necessary to
install tie-down brackets to the floor of your trailer
or truck.
NOTE: Do not use the control grips to secure machine
when transporting.
FOR SAFETY: When transporting machine, use a
recommended ramp when loading/unloading
on/off truck or trailer, use tie- -down straps to
secure machine to truck or trailer.
NOTE: When transporting machine in freezing
temperatures see STORING MACHINE.
Tennant 1610 (10- -05)
Home Find... Go To..

STORING MACHINE

1. Charge the batteries before storing. Never store
the machine with discharged batteries.
2. Drain and rinse tanks thoroughly.
3. Store the machine in a dry area with the scrub
head in the raised position.
4. Remove the recovery tank lid to promote air
circulation.
ATTENTION: If storing the machine in freezing
temperatures, be certain to drain tanks, purge
pump and remove the solution tank filter located
under the machine at rear.
ATTENTION: Do not expose machine to rain, store
indoors.

RECOMMENDED STOCK ITEMS

Refer to the Parts List Manual for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
OPERATION EN
23