Machine Data - Tennant 1610 Operator's Manual

EN OPERATION
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions.
Read and understand the operator's manual
before operating or servicing machine.
A complete illustrated Parts List manual is also
furnished with each new model. Use the Parts List
manual to order replacement parts. Before ordering
parts or supplies, be sure to have your machine model
number and serial number available. Parts and
supplies may be ordered by phone or mail from any
authorized parts and service center, distributor or from
any of the manufacturer's subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
The machine is operated with reasonable care.
S
The machine is maintained regularly - per the
S
machine maintenance instructions provided.
The machine is maintained with manufacturer
S
supplied or equivalent parts.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,
old machine components such as
batteries, hazardous fluids such as
antifreeze and oil, in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
TENNANT N.V.
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden- -The Netherlands
europe@tennantco.com
www.tennantco.com
Specifications and parts are subject to change without notice.
Copyright E2005, 2007 Tennant Company. All rights reserved.
EN EC DECLARATION OF CONFORMITY FOR MACHINERY
TENNANT N.V.
Address: Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden--The Netherlands
Uden/Netherlands, 26- -05- -04
Richard van den Hoogen -- Technical Support Engineer
2
Model: 1610 nr.: M16105003
Herewith declares, on our own responsibility, that the machinery
-- is in conformity with the provisions of the Machinery Directive (98/37/EEC), as amended
with national implementing legislation
-- is in conformity with the provisions of the E.M.C. Directive (89/336/EEC), as amended with 91/263 EEC,
92/31 EEC, 93/67EEC , 93/68 EEC
and that
-- the following (parts/clauses of) harmonized standards have been applied: EN: 292--1, 292--2, 292--3,
1050, 418, 982, 1037, 60204--1,61310--1, 61310--2, 457, 614--1, 1005--3, 563, 50081--2, 50082--2, 12895,
ISO: 3744, 3746
-- the following (parts/clauses of) national technical standards and specifications have been used: NA
Home Find... Go To..

MACHINE DATA

Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
(Directive 98//37/EEC, Annex II, sub A)
Tennant 1610 (04- -07)